Maker Pro
Maker Pro

Mercury computer codes

N

Nathan Schemm

Jan 1, 1970
0
Hi everyone,
I am an electrical hobbyist, and I am looking at making a little add
on to my Mercury Grand Marquis. I want to use a little processor, and
read the computer codes on the Mercury periodically, among other
functions. My problem is I can't find any technical information on the
protocol/error message definitions. If any of you have run across such
information, I would greatly appreciate it if you could send it to me.
Thanks
 
S

Sharon K. Cooke

Jan 1, 1970
0
Is your Mercury any particular year?
 
A

Al

Jan 1, 1970
0
Hi everyone,
I am an electrical hobbyist, and I am looking at making a little add
on to my Mercury Grand Marquis. I want to use a little processor, and
read the computer codes on the Mercury periodically, among other
functions. My problem is I can't find any technical information on the
protocol/error message definitions. If any of you have run across such
information, I would greatly appreciate it if you could send it to me.
Thanks

If your car is '96 or later, this is what you want.

http://www.carchip.com/home_static.asp

Al
 
W

Watson A.Name - Watt Sun, Dark Remover

Jan 1, 1970
0
Hi everyone,
I am an electrical hobbyist, and I am looking at making a little add
on to my Mercury Grand Marquis. I want to use a little processor, and
read the computer codes on the Mercury periodically, among other
functions. My problem is I can't find any technical information on the
protocol/error message definitions. If any of you have run across such
information, I would greatly appreciate it if you could send it to me.
Thanks

You didn't even say what year it is. You should be asking this on the
rec.auto.tech newsgroup.

I've seen all sorts of info on the 'net about the Fords ECS system,
the info isn't hard to find.

--
@@F@r@o@m@@O@r@a@n@g@e@@C@o@u@n@t@y@,@@C@a@l@,@@w@h@e@r@e@@
###Got a Question about ELECTRONICS? Check HERE First:###
http://users.pandora.be/educypedia/electronics/databank.htm
My email address is whitelisted. *All* email sent to it
goes directly to the trash unless you add NOSPAM in the
Subject: line with other stuff. alondra101 <at> hotmail.com
Don't be ripped off by the big book dealers. Go to the URL
that will give you a choice and save you money(up to half).
http://www.everybookstore.com You'll be glad you did!
Just when you thought you had all this figured out, the gov't
changed it: http://physics.nist.gov/cuu/Units/binary.html
@@t@h@e@@a@f@f@l@u@e@n@t@@m@e@e@t@@t@h@e@@E@f@f@l@u@e@n@t@@
 
J

JeffM

Jan 1, 1970
0
I want to... read the computer codes on the Mercury periodically
Nathan Schemm

Watt Sun's post lead here:
http://groups.google.com/groups?num...safe=off&q=OBDII+OR+OBD-II&btnG=Google+Search

cessna's post lead here:
(I recently saw an ad for a $140 device--I should have remembered.)
http://www.google.com/search?num=10...fe=off&q=OBDII+OR+"OBD+II"&btnG=Google+Search

Bev Roadman's page is here:
http://obddiagnostics.com/

Jeff Noxon (and the OpenDiag project)
have done this for Volkswagen, Audi, Seat, or Skoda only.
http://www.planetfall.com/~jeff/obdii/
http://www.opendiag.org/

I would greatly appreciate it if you could send it to me.

You need to learn more about how newsgroups work. (Think "community".)
 
J

JeffM

Jan 1, 1970
0
I want to... read the computer codes on the Mercury periodically
Pages about On-Board Diagnostic system version 2 (OBD-II) that you
should read:

http://www.nsxprime.com/FAQ/Miscellaneous/OBDII.htm
The basics

http://obddiagnostics.com/FAQ.html
Good FAQ

http://www.cardlabs.com/CardLabs_obd2.htm
The communications protocols

http://www.obdii.com/connector.html
Which cars use which protocol?

http://www.andywhittaker.com/ecu/obdii_hardware.htm
List of software projects at the bottom of the page)

http://freediag.sourceforge.net/doc/Scantool-Manual.htm
A software project
DIY hardware projects at the bottom of the page

http://www.planetfall.com/~jeff/obdii/
Jeff Noxon's hardware interface project
(He says it's for Volkswagen, Audi, Seat, or Skoda only)
PDF & EAGLE docs; links to cables and software

http://www.avt-hq.com/OBD_hw.htm
Has connector pinouts

http://www.openg.org/tiki/tiki-view...mode=commentDate_desc&topics_find=&forumId=23
These guys are trying to do their own software project
(Back up thru the directory tree for more insight)
 
Top