Maker Pro
Maker Pro

Micro parts

RichB007

May 16, 2024
2
Joined
May 16, 2024
Messages
2
I want to use led lighting to illuminate some plastic items.
The items will be small, around 10mm x 20mm and as thin as possible.
There will be several of them in a group and they need to be controllable by an app and chargeable lasting a couple of hours.
I think I need
the led to illuminate,
the Bluetooth controller to control colours and talk to phone app,
A rechargeable battery
A pcb
Are there micro parts available small enough to fit into the small size and if so where would I get them.
I Have seen micro oled screens but even at .92" there to big.
I realise this tricky so any guidance is welcome
.
Thanks

Quote Reply
Report
 

Externet

Aug 24, 2009
897
Joined
Aug 24, 2009
Messages
897
Yes, use your LEDs to illuminate your plastic parts. Put your battery, bluetooth, together on a pcboard and control with a application after you source the tricky micro parts on the net.
 

RichB007

May 16, 2024
2
Joined
May 16, 2024
Messages
2
Will I need a controller in each unit as well or will the Bluetooth module do what I need, eg operate the led
 

Alec_t

Jul 7, 2015
3,647
Joined
Jul 7, 2015
Messages
3,647
You would have to check the datasheet for the Bluetooth module, but I'd be surprised if the module also had LED control features.
 
Top