Maker Pro
Maker Pro

Missing programming codes for Moving Message Board

Status
Not open for further replies.

JPiscitelli

May 13, 2018
3
Joined
May 13, 2018
Messages
3
Hello. I have an Ledvision LC300 3.03 moving message sign with a Philips IR keyboard SWK-8630. Unfortunately, I have lost the instructions with the programming codes and have no way to change the sign. I have scoured the internet and have tried to reach out to the company that has taken over Ledvision with no success. Any help would be appreciated. Thanks much, John.
 

statas

Aug 11, 2020
1
Joined
Aug 11, 2020
Messages
1
i know it has been over 2 years since you posted, but i was attempting to find that same manual online.
i didn't.

but i did find it in real life. if you are still looking, reply here. i'll find a way to get scans to you
 

Harald Kapp

Moderator
Moderator
Nov 17, 2011
13,769
Joined
Nov 17, 2011
Messages
13,769
@JPiscitelli : a new message for you
@statas : If you want the op to be notified about your find, include him with an "@" sign in your message as demonstrated here.
 

Venom8898

Nov 27, 2022
2
Joined
Nov 27, 2022
Messages
2
@statas. Did you ever find the scans for the keyboard? If so could you please get me the scans. I also have a LEDVision sign that uses that Philips keyboard and am missing the manual to use it. Thanks for any help you can provide. My email is [mod edit: E-mail removed for privacy: please use the conversation feature of the forum to make contact]
 
Last edited by a moderator:

JPiscitelli

May 13, 2018
3
Joined
May 13, 2018
Messages
3
Thanks anyway. I gave up after searching for a year or so and got rid of my lighted sign / keyboard.
 

Venom8898

Nov 27, 2022
2
Joined
Nov 27, 2022
Messages
2
Yeah I've been looking for quite a while as well. I saw a glimmer of hope when I saw @statas response to your post. Did they ever send you the documents?
 

JPiscitelli

May 13, 2018
3
Joined
May 13, 2018
Messages
3
No, I had somehow missed his message until I saw yours. I had gotten rid of it well before he responded anyway. Good luck!
 

IdahoTim

Apr 27, 2024
2
Joined
Apr 27, 2024
Messages
2
i know it has been over 2 years since you posted, but i was attempting to find that same manual online.
i didn't.

but i did find it in real life. if you are still looking, reply here. i'll find a way to get scans to you
@Venom8898
I know this is a super old post, but if anyone is still searching for the software that programs these old scrolling LEDVision units using a Wireless Keyboard or 9-Pin serial cable, I have the software.

It's called LEDWorks from the now defunct company called Electronics Manufacturing Technology, Inc. and/or BriteliteLED(dot)com

I don't want to violate any rules here by attaching the software, so I'll post up a PDF of the User Manual that shows photos of the units it supports.
This manual can be used with the Wireless Keyboard As-Is, or you can use the LEDWorks software and program these units with a Serial Port.

Let me know if you need the actual LEDWorks software.
 

Attachments

  • LEDWORKS_user_manual.pdf
    758.1 KB · Views: 3
Last edited:
Status
Not open for further replies.
Top