Maker Pro
Maker Pro

mitsubishi 52525 and over the air signal

I am getting a message and a blue screen telling me that the channel
is not available however, when I unplug the tv and replug it in the
channels are all there including the HD local channels out of NY and
Philly. I know that it is bad for the bulb life doing this. I just
replaced the bulb after approx 1000 hours. Any suggestions would be
appreciated. Jack
 
L

Leonard Caillouet

Jan 1, 1970
0
Get a better antenna and check to see if there are any firmware updates from
Mitsubishi that might affect the problem. Could be a bad DM module or
signal board. Has the unit ever had trouble getting past the boot cycle?

Leonard
 
Top