Maker Pro
Maker Pro

Mitsubishi VS-8078 red crt needed

G

Guest

Jan 1, 1970
0
Hi. Mitsubishi VS-8078 set. Need a red crt as this one is shorted, cannot
bring raster down to a reasonable level.. Does show video. Tried crt board
on different but problem did not follow board.

This is the bigger version tube, not the little one.

Thanks, Danny
 
L

Leonard Caillouet

Jan 1, 1970
0
Check that model number and post the mitsubishi part number and the type
number off of the CRT.

Leonard
 
J

James Sweet

Jan 1, 1970
0
Leonard Caillouet said:
Check that model number and post the mitsubishi part number and the type
number off of the CRT.

Leonard


You might try isolating the heater, it sounds like it could be a H-K short.
Could possibly get a few more years out of the tube you have.
 
G

Guest

Jan 1, 1970
0
That is what I am kinda leaning towards, using a short isolating
transformer. Have had good luck with them in the past.
 
Top