Maker Pro
Maker Pro

Mitsubishi wt 46809

J

James Sweet

Jan 1, 1970
0
I recently got a 46809 and when I went to turn it on, the power light
goes on for 3 sec and then it turns off. Please help


What sort of help are you looking for? There's pretty clearly an
internal fault which is being detected and the system control is
shutting it down. If you have electronics diagnostic skills then someone
may have some tips, but this isn't going to be something obvious like a
fuse or switch, some digging and measurement will be required.
 
L

Leonard Caillouet

Jan 1, 1970
0
Press menu and input simultaneously for five seconds and note the pattern of
flashing on the LED and compare it to the info in the training manual. Then
tourbleshoot the problem to determine where the fault is occuring. If you
do not have the proper training and service literature, at least report the
fault code and any measurements you have made. Otherwise get an experienced
Mits tech to look at it.

Leonard
 
Top