I have 6 Nixie tubes B7971 and a few MM5314 chips.
I have 5 HV drivers DS8880 but I think this is a multiplexed design which can't use this.
I would get the HV from rectified mains ~ 160 V for the HV side of the Nixies to make it as simple as possible.
Does anyone know of a schematic to help me build this clock with this chip?
How are the 7 segment Nixie tube displays decoded using? 74141 chips.
Thanks for the help.
Dan
I have 5 HV drivers DS8880 but I think this is a multiplexed design which can't use this.
I would get the HV from rectified mains ~ 160 V for the HV side of the Nixies to make it as simple as possible.
Does anyone know of a schematic to help me build this clock with this chip?
How are the 7 segment Nixie tube displays decoded using? 74141 chips.
Thanks for the help.
Dan