Maker Pro
Maker Pro

Mobile phone questions

K

Kissing Lettuce

Jan 1, 1970
0
First off are signal dropouts caused by moving from one
cell and then into another? and when you move from
an open area to say inside a building or behind a hill or
a 'dark spot' where there is less signal penetration....

Would allowing you to roam between networks when the
signal level drops below a certain point solve the problem
and if it would why aren't the networks allowing this to
happen? It surely wouldn't be a cost to them to allow for
this would it?
 
R

Rod Speed

Jan 1, 1970
0
First off are signal dropouts caused by
moving from one cell and then into another?

Not usually.
and when you move from an open area to say inside a building or
behind a hill or a 'dark spot' where there is less signal penetration....
Usually.

Would allowing you to roam between networks when the
signal level drops below a certain point solve the problem
Usually.

and if it would why aren't the networks allowing this to happen?

Nothing in it for them in most situations.
It surely wouldn't be a cost to them to allow for this would it?

Corse it does, they have to pay for the use of the other networks.
 
Top