I have a decent 1100 watt modified sinewave invertor. 12 VDC to 120 VAC. Nice readout, input volts, Iout, couple warning prompts. If you have seen modified sinewave output then you are aware that it is mostly square wave with 4 shoulder levels per cycle. Pretty cheesy. Good for purely resistive load but hell on anything with windings. IF, I put a couple 25000 ufd 250 volt caps in parallel with inverter Vout, will I see something more closely resembling a sinewave? Say pulling about half capacity, around 500 W?
-
Categories
-
Platforms
-
Content