Maker Pro
Maker Pro

Modifying a Huntron 2000



Jan 1, 1970
I was talking with the Huntron people and if they say that the old
2000 doesn't do a good job on ICs. They told me you need a new model
that goes down to 300mV to get passed the protection diode. I have a
2000. Can I put a resistor in series with one of the leads to try and
drop the output down to 300mV? As you know. The Huntron puts out 5,
10,15, 40 VAC at 50, 400,2000 hz. You can choose the combo you want
with buttons on the front. Can it be that simple? or do I risk
damaging the unit buy doing something like this?