Maker Pro
Maker Pro

Monitor problem

F

flocculus

Jan 1, 1970
0
I have quite new LCD Samsung Syncmaster 720n monitor. Since about
three days there's a problem. On very start of comuter it shows
"Brightness" in center. It appears when it wants with no activity on
my side. When I press Auto or Menu button on monitor in disappears for
good or for only a second. Anyway it can drive crazy. Do You know
where the problem may begin? Is it monitor failure, or graphic card
failure? Or something else? Help
 
M

Meat Plow

Jan 1, 1970
0
I have quite new LCD Samsung Syncmaster 720n monitor. Since about
three days there's a problem. On very start of comuter it shows
"Brightness" in center. It appears when it wants with no activity on
my side. When I press Auto or Menu button on monitor in disappears for
good or for only a second. Anyway it can drive crazy. Do You know
where the problem may begin? Is it monitor failure, or graphic card
failure? Or something else? Help

Likely problem with monitor on screen display. If it's "quite new" it's
under warranty, have it repaired.
 
C

Chris Jones

Jan 1, 1970
0
flocculus said:

Is there a button on the monitor that would bring up the "brightness" menu?
Maybe that switch is faulty, or the casing is mechanically pressing on that
switch and activating the menu. Try pressing gently on the casing around
that switch and see if it causes or affects the problem.

Chris
 
Top