Maker Pro
Maker Pro

Monochrome display wiring

JonnySC

Mar 10, 2016
1
Joined
Mar 10, 2016
Messages
1
Hello I'm wiring a monochrome 0.96 display to my uno it's a off brand (non adafruit) and the diagram I'm following only has the information for adafruit
The pins on my screen are from left to right
Gnd, vcc ,do ,d1 , Rst , dc , cs
And you can look up the one for the adafruit one
Basically the diagram says wire "data" pin to arduino a4
"Clk" to pin a5
And "Rst" pin to arduino pin 4
My super long question is asking what pins on my display are the pins on the adafruit one
 

shrtrnd

Jan 15, 2010
3,826
Joined
Jan 15, 2010
Messages
3,826
It'd help if we knew any information on the make of the display.
Do you have a mfgr and/or model number?
 

davenn

Moderator
Sep 5, 2009
14,011
Joined
Sep 5, 2009
Messages
14,011
It'd help if we knew any information on the make of the display.
Do you have a mfgr and/or model number?

indeed ! :)

and link to datasheet and any other useful info
 
Top