Maker Pro
Maker Pro

MOT Help

Wettfeat

Nov 23, 2012
1
Joined
Nov 23, 2012
Messages
1
Hey guys,

I'm new here, I have a MOT because I'm trying to make a spot welder but I'm not sure where to solder the leads from the power plug to. Instead of the usual black and white wires to each terminal it's black/white on one and blue on the other. :confused:
 

Attachments

  • 1123121705.jpg
    1123121705.jpg
    136 KB · Views: 100

ssshocked

Dec 1, 2012
2
Joined
Dec 1, 2012
Messages
2
the blue and the white or black
the white and the black are connected like they are one
if you wire the white and black you will have short circuit
 
Top