-
Categories
-
Platforms
-
Content
I have a Micronta 22-210 Mulitmeter that works on all functions except AC. Check battiers and. fuse OK .Need help.
After checking Martaine2005's advice, if you have any troubleshooting skills open the case up and look for burned components.
A lot of DMV's I've worked on have a resistor at the V input jack to limit high voltage current for readings. That resistor is prone to burn-up at overvoltage.
After checking Martaine2005's advice, if you have any troubleshooting skills open the case up and look for burned components.
A lot of DVM's I've worked on have a resistor at the V input jack to limit high voltage current for readings. That resistor is prone to burn-up at overvoltage.
.
Sir Jimmie . . . . .
If all of the other functions are OK on that Simpson "wanna be ", then compare its components against the schema below and see what might be bad along
the GREEN ARROW path of the AC function of the unit.
73's de Edd
.
.
Sir Jimmie . . . . .
If all of the other functions are OK on that Simpson "wanna be ", then compare its components against the schema below and see what might be bad along
the GREEN ARROW path of the AC function of the unit.
73's de Edd
.