Maker Pro
Maker Pro

Mystery Component

Dougvv

Apr 4, 2014
2
Joined
Apr 4, 2014
Messages
2
I have a component from a printed circuit board attached to a small electric motor. The circuit board contains only two items, a Bridget rectifier designated KPPC1 -- 10 which I believe is an output of 3 amps than 1000 V. The other component has two wires going to the circuit board and is about 1.5 cm long by 1.2 cm high and.5 cm wide, the markings on this components are 104K and 630V. Could somebody advise what this component might be and where I could obtain a replacement.
Many thanks,
Dougvv.
 

kpatz

Feb 24, 2014
329
Joined
Feb 24, 2014
Messages
329
Can you post a pic of it?

It's probably a capacitor. 104K means 0.1uF or 100nF, K = 10% tolerance, and a 630V max voltage.
 

Dougvv

Apr 4, 2014
2
Joined
Apr 4, 2014
Messages
2
Photo

Thanks,
Photo enclosed.
 

Attachments

  • IMG_0437.jpg
    IMG_0437.jpg
    72.8 KB · Views: 113

jpanhalt

Nov 12, 2013
426
Joined
Nov 12, 2013
Messages
426
0.1 µF capacitor with a working voltage of 630V (DC).

Probably for some sort of electrical noise suppression.

John
 
Top