Maker Pro
Maker Pro

Nakamichi BX-125 one channel out.

D

David Farber

Jan 1, 1970
0
This Nakamichi BX-125 cassette deck has no output on either playback or
record on the right channel. The l.e.d. meters are responding. When a newly
recorded tape is rewound and played back, both left and right meters respond
properly. I tried tracing backward from the line output jack but I could not
pick up the point where the signal gets lost. Anyone have a schematic or
block diagram that could point me in the right direction?

Thanks for your reply.
 
L

Leonard Caillouet

Jan 1, 1970
0
This is a stereo unit. Can't you just trace the signal back from the
outputs or from the head preamp to see where it differs in the two channels?

Leonard
 
D

David Farber

Jan 1, 1970
0
Hi Leonard,

I was able to trace the signal back to the playback level volume control.
This is a stereo level control that is user adjustable at the front panel. I
checked the level in and out of the volume control and sure enough, only one
signal was coming out while two were going in. One side of the control had
no continuity to the wiper tap. I bypassed the control completely and that
fixed it.

Thanks for your reply.
 
Top