Maker Pro
Maker Pro

need a hand,

T

tzurs

Jan 1, 1970
0
Hi,

I know very little about electronics, I'm a computer science MSc, here's
what I'm after,
I want to build a pair of devices as small as possible but need not be super
tiny (2x4x1 cm is fine),
it is a transmitter / receiver pair, they should respond to each other (one
way only is needed) within the house, so, I'd say about 20 meters should be
enough, but, direct line contact is not guaranteed, (rule out Infra red if I
understand some of what I'm read from browsing the web),
basically it should be something like your vehicle remote thing that unlocks
the doors (functionality wise), just that the received part should also be
as small as possible.

I've read allot in the web but can't seem to understand what exactly I need,
is it RF tx/rx? how much MHz is needed?
is it FM? AM?
I've tried but there is too much not explained in those sites, I thought
someone here can help.

any comment <--- appreciated
bests.
-tzurs.
 
M

Mark

Jan 1, 1970
0
Hi,

I know very little about electronics, I'm a computer science MSc, here's
what I'm after,
I want to build a pair of devices as small as possible but need not be super
tiny (2x4x1 cm is fine),
it is a transmitter / receiver pair,
Do a search for Velleman. They produce a large variety of
DIY kits. Many are available from Parts Express.

--
Mark

The truth as I perceive it to be.
Your perception may be different.

Triple Z is spam control.
 
Top