Maker Pro
Maker Pro

Need a replacement thermal switch

skyace888

Nov 3, 2021
2
Joined
Nov 3, 2021
Messages
2
Hi all!

I have a Chauvet 1DX haze machine that I was running for Halloween and the thermal switch in it seems to have gone bad. It is a KSD301GR 16A rated at 130C. It has a manual trip button. I'd ideally like to replace it with an auto one that doesn't have a button but the ones I am finding online are 10A and not 16A so not sure if I can go that route. I contacted the manufacturer, Chauvet, but they don't have a suitable replacement unfortunately. According to the manual at https://www.chauvetdj.com/wp-content/uploads/2017/01/Hurricane_Haze_1DX_UM_Rev3.pdf, the operating current is 2.5A and fuse is 5A. Suggestions greatly appreciated as to where I can find an appropriate thermal switch replacement. Thanks!
 
Top