Maker Pro
Maker Pro

Need help building a basic digital counting circuit.

Maveric169

Oct 15, 2014
12
Joined
Oct 15, 2014
Messages
12
Thanks for replying back Kris, ok so this is what I came up with as far as separating it out. I put the reset circuit together with the switch by it'self. I think I was taking the schematic I got online a little to literal with the connections they made. Let me know if this looks like it should work now.
 

Attachments

  • breadboard-circuit-design.png
    breadboard-circuit-design.png
    9.6 KB · Views: 199

KrisBlueNZ

Sadly passed away in 2015
Nov 28, 2011
8,393
Joined
Nov 28, 2011
Messages
8,393
Yes, that looks better.

I think you need to tie the clock inhibit inputs (pin 2 on each 4026) low. Then it should be good to go!
 
Top