Maker Pro
Maker Pro

Need help cross referencing this part.

GreenMeanie

Mar 5, 2017
2
Joined
Mar 5, 2017
Messages
2
I am working on a SCSI external cd-rom and found this part blown in half. I have it sitting together in the PIC but it is actually blown apart.
I was wondering if you could help with ordering a replacement part from somewhere like mouser. It is a no name cd-rom enclosure so there is no finding schematics for it.
 

Attachments

  • IMG_0461.JPG
    IMG_0461.JPG
    261.6 KB · Views: 110

davenn

Moderator
Sep 5, 2009
14,254
Joined
Sep 5, 2009
Messages
14,254
I am working on a SCSI external cd-rom and found this part blown in half. I have it sitting together in the PIC but it is actually blown apart.
I was wondering if you could help with ordering a replacement part from somewhere like mouser. It is a no name cd-rom enclosure so there is no finding schematics for it.

here's the datasheet for a TOP202YAI ....

http://www.mouser.com/ds/2/328/power integrations_top200-204214-327915.pdf

according to mouser it is obsolete and they no longer stock it

you could google search for "sales of TOP202YAI" and see how you go
 

(*steve*)

¡sǝpodᴉʇuɐ ǝɥʇ ɹɐǝɥd
Moderator
Jan 21, 2010
25,510
Joined
Jan 21, 2010
Messages
25,510
It may be easier to replace the power supply. Typically they supply 12V and 5V to the CD-ROM and not much else.

The are plenty of small power supplies available that can do this. They are likely to be not much different in cost to the part you need, and you have no guarantee that it is just this part which is at fault.
 
Top