Maker Pro
Maker Pro

Need Help Finding A Replacement Encoder

radiotek

May 31, 2011
32
Joined
May 31, 2011
Messages
32
Alfa_Rotary_Encoders.jpg

Trying to find a replacement mechanical encoder for a Sangean ATS-505 radio I own. The decoder is approximately 11 to 12mm square that's vertically mounted and has a total of 5 contacts, 3 for tuning up and down and 2 for a switch.

Not sure how many detentes but I am sure that anything between 16 and 24 should be OK.

Any help would be greatly appreciated.
 

radiotek

May 31, 2011
32
Joined
May 31, 2011
Messages
32
Thanks a lot for the links. In the meantime I did some more searching and found almost the exact one made by ALPS..

Thanks again.
 
Top