Maker Pro
Maker Pro

Need Help Finding Vintage Molex

alfa88

Dec 1, 2010
349
Joined
Dec 1, 2010
Messages
349
My eyes are practically bleeding trying to source 60s-70s vintage, chassis mount, male Molex connectors. Note the side view. The connector slips through a rectangle hole and is locked in place.
Pin dia. is 1mm x 1mm, spacing is 4mm .
Side View.jpg Vintage Male Molex Pnl Mount.jpg
 

kellys_eye

Jun 25, 2010
4,864
Joined
Jun 25, 2010
Messages
4,864
Tried forums specific to 'antique' equipment restoration?

There is one in the UK called 'UK Vintage Radio' - https://www.vintage-radio.net/forum/index.php? where the membership will almost invariably either have one or know where to get one! Seriously, the guys on there are an absolute MINE of knowledge and experience.

What, precisely, is the make/model of the equipment it's from? I've seen them myself in the past - not sure if my junk box still has any though. Looks like something from an old juke box or gaming machine????
 

alfa88

Dec 1, 2010
349
Joined
Dec 1, 2010
Messages
349
It's for a SWTPC kit from the 70s. The meter has 5 different modules that plug into the display section. It is a bear to calibrate since you have to dismantle the whole thing. I'd like to make some extender cables.
 

Attachments

  • Universal Digital Instrument Manual Cover.jpg
    Universal Digital Instrument Manual Cover.jpg
    62.7 KB · Views: 7
Top