Hey guys! This is my first post and I'm an electronics noob so I hope I'm in the right place... I have narrowed down a problem I'm having with my Roland XP-50 synthesizer to a couple of particular capacitors. I know how to solder components but am not an expert by any means so I'm not sure how to identify the new ones I need to purchase.
The schematic shows "16CV10" below both of these capacitors. Is this enough info to go on, and can someone translate this into the values I'll need to know when buying new ones? Other than this I can say that they are aluminum surface-mount capacitors, but that is about all I know without having them in front of me at the moment (although I will tonight so I can check the codes/markings then if needed). Thanks in advance for any help!
The schematic shows "16CV10" below both of these capacitors. Is this enough info to go on, and can someone translate this into the values I'll need to know when buying new ones? Other than this I can say that they are aluminum surface-mount capacitors, but that is about all I know without having them in front of me at the moment (although I will tonight so I can check the codes/markings then if needed). Thanks in advance for any help!