Maker Pro
Maker Pro

Need Help Identifying Collector, Emitter, and Base

davenn

Moderator
Sep 5, 2009
14,043
Joined
Sep 5, 2009
Messages
14,043
I found the data sheet but I can't identify which pins belong to the emitter, base, and collector.

it doesn't have E, B and C because it is a FET
It has a G, D and S gate drain and source and your datasheet shows which is which
 

GeneralBones

Jan 24, 2017
19
Joined
Jan 24, 2017
Messages
19
Ohhh okay so I can't use this for a Tesla coil? I'm assuming it won't work like a transistor with e b & c
 

GeneralBones

Jan 24, 2017
19
Joined
Jan 24, 2017
Messages
19
Something like this except with a bigger coil and PSU, something like 12v-24v idk I'll experiment. I already mad thst circuit and it works pretty well
 

duke37

Jan 9, 2011
5,364
Joined
Jan 9, 2011
Messages
5,364
A fet will work as a replacement for a bjt. You will need less control current but much more voltage. You still have not shown a schematic (US).
 
Top