Maker Pro
Maker Pro

Need help in display connetion with pcb

sanoop

Jul 2, 2017
2
Joined
Jul 2, 2017
Messages
2
this display is from my treadmill display console. i think the rubber strip which connects the lcd with pcb is damaged .
any alternative methods for the connection ..

thanks in advance
 

Attachments

  • WhatsApp Image 2017-07-02 at 6.55.42 PM.jpeg
    WhatsApp Image 2017-07-02 at 6.55.42 PM.jpeg
    96.8 KB · Views: 137

kellys_eye

Jun 25, 2010
6,514
Joined
Jun 25, 2010
Messages
6,514
No.

That's what's called 'zebra strip' but it is available online if you search.

It rarely goes 'wrong' - most faults occur when the mating surfaces are contaminated in some way. Give all surfaces that meet (both sides of the strip and the two plated mating surfaces) a thorough clean using IPA (iso-propyl-alchohol) and make sure the correct pressure is exerted between the two - this part is important.

If you over pressure the joint you'll damage the LCD.
 
Top