Maker Pro
Maker Pro

NEED HELP making 4-bit adder/subtractor in Logisim

Austin Cabuco

Dec 10, 2017
2
Joined
Dec 10, 2017
Messages
2
Hello, I am a student and need help creating a 4-bit adder/subtractor on logisim which displays the result in a 7-Segment display. My current circuit adds my inputs up to "9" and subtracts up to "0" which is displayed on a single 7-segment. although, I also need to represent negative results with two displays (one being the negative sign and the other being the digit). I also need to display an "E" when overflow occurs. Attached is my current circuit ( the other variation uses only one chip for the adder/subtractor). I greatly appreciate any help :)
 

Attachments

  • Capture.PNG
    Capture.PNG
    13.7 KB · Views: 144
  • Update.PNG
    Update.PNG
    13.1 KB · Views: 126

Austin Cabuco

Dec 10, 2017
2
Joined
Dec 10, 2017
Messages
2
UPDATE: i attached a labeled schematic
 

Attachments

  • labeled schematic.PNG
    labeled schematic.PNG
    21.3 KB · Views: 383
Top