Maker Pro
Maker Pro

Need help making a 4.3" lcd into a push button video display

coltenford

Jun 19, 2013
1
Joined
Jun 19, 2013
Messages
1
i need ideas to take an already assembled 4.3" lcd and make it able to read video from a usb and able to play that video with a push button.

any help is appreciated.
 

davenn

Moderator
Sep 5, 2009
14,304
Joined
Sep 5, 2009
Messages
14,304
hi coltenford

welcome to the forums :)
Dunno what your electronics experience is like, but what you have planned is not a simple project
you are going to need a processor with a USB interface, and one that can drive a graphics adaptor that will suit the LCD display.
Does the LCD display currently have any specific video input compatability
that is ... when you say already assembled .... what do you mean ?

but just a hint, unless you are a serious electronics engineer, this is likely to be way out of your league

Dave
 
Top