Maker Pro
Maker Pro

Need Help on "Test" button circuit with multiple LEDs

G

Gman

Jan 1, 1970
0
Hi there,

I am in the process of completing a circuit design (trying to, I'm not
an electronics technician), that has 8 sensors that are run through 8
LEDs to indicate the positions of 4 actuators.

In the circuit I have a 3 way toggle switch that is used to dim the
LEDs at night, has a DAY position (normal operation), and a momentary
TEST position.

Because the voltage is supplied directly from the sensors to illuminate
the LEDs I'm having a tough time figuring out the TEST circuit.

I'm looking for some direction on a circuit I could use to momentarily
test that all the LEDs are working using the toggle switch?

I am trying to keep the circuit as simple as possible.

Thanks in advance.
G
 
E

Externet

Jan 1, 1970
0
Hi.
You need to insert diodes between the sensors and leds, and feed each
led with another inserted diode from the test switch.
Miguel
 
G

Gman

Jan 1, 1970
0
Thanks,

That is sort of what I figured, for some reason drawing a blank when
trying to think of it. Truly appreciated.

G
 
Top