Maker Pro
Maker Pro

Need help to fix old RC controller

Ralf Kalkuhl

Dec 13, 2016
7
Joined
Dec 13, 2016
Messages
7
I dont know anything about circuits i just need help to solder the negative wire back to the board i just dont know where to solder the wire on the board any help would be appreciated.
 

Attachments

  • IMG_9691.JPG
    IMG_9691.JPG
    137.3 KB · Views: 105

Harald Kapp

Moderator
Moderator
Nov 17, 2011
13,763
Joined
Nov 17, 2011
Messages
13,763
Show us an image of the back of the pCB.
It may also help to know which chip is under the label "Modul Nr. 40018" as knowing where the chip's ground pin is helps identifying the trace to the wire pad.
 

Bluejets

Oct 5, 2014
6,990
Joined
Oct 5, 2014
Messages
6,990
Good chance that the negative sign (-) on the electrolytic capacitor will be the negative rail.

It's the can looking device between D3 and R8.

Nice clear photo of the reverse side of the board would help also.
 

Ralf Kalkuhl

Dec 13, 2016
7
Joined
Dec 13, 2016
Messages
7
Here's a pic of the back and the chip
 

Attachments

  • IMG_9698.JPG
    IMG_9698.JPG
    132.4 KB · Views: 75
  • IMG_9699.JPG
    IMG_9699.JPG
    103.9 KB · Views: 74

Ralf Kalkuhl

Dec 13, 2016
7
Joined
Dec 13, 2016
Messages
7
thanks guys i actually got it working again the ground rail was on that can thing
 
Top