Maker Pro
Maker Pro

Need help with BGA footprint

omdatov

Feb 17, 2010
6
Joined
Feb 17, 2010
Messages
6
Hello,
Can anybody tell me when I would make the footprint of a BGA component and in the datasheet the give me three value about the diameter of the ball, it means 0.4 , 0.45 and 0.5
the min , typical and the max so which value should I take ??
Thanx
 

55pilot

Feb 23, 2010
434
Joined
Feb 23, 2010
Messages
434
Both Xilinx and TI have excellent application notes about BGA footprints and a lot of related design issues. Search their websites.
 
Top