Maker Pro
Maker Pro

Need Help With My First Electronics project

B

Bill Gallagher

Jan 1, 1970
0
I have completed assembly of a guitar effects box off of a schematic
but don't know where to hook up the 9volt power or the in and outputs
(1/4" jacks) can I send a copy of the schematic to you for help?
 
D

David Harmon

Jan 1, 1970
0
On 5 Oct 2004 13:47:47 -0700 in sci.electronics.basics, [email protected]
(Bill Gallagher) wrote,
I have completed assembly of a guitar effects box off of a schematic
but don't know where to hook up the 9volt power or the in and outputs
(1/4" jacks) can I send a copy of the schematic to you for help?

You can post the schematic with your questions to newsgroup
alt.binaries.schematics.electronic
Many of the same people will see it there as here.

In many cases, schematics are drawn by convention with the inputs on the
left hand side, the outputs on the right, the positive power connection
at top and the negative power connection at the bottom. That may make
it easier to figure out the connections.
 
Top