Maker Pro
Maker Pro

Need HP4062 Info, please

J

Jerry R

Jan 1, 1970
0
Please help.

The computer on our HP 4062A Semiconductor Parametric Tester died. Yeah, I
know, we should've upgraded it 10 years ago while it was still supported,
but nobody wanted to lay out the capital funds. I am now tasked with taking
the system components (below) and building a new PC-based system. The
components are:

HP4820B C Meter/C-V Plotter
HP4141B Stimulus/Measurement Unit
HP4084B Switch Matrix Controller (with a 4085 switch)

Now for the bad I don't have any of the component's documentation,
except the 4820. Searches on Agilent.com have yeilded nothing useful
(they're obsolete and they stopped supporting them years ago).

I need the HP-IB commands and data format info for the 4141 and the
4084/4085. Any help would be greatly appreciated.

Thanks,
....jerry
jerry (period) roush (Shift+2) honeywell,com
 
M

Michael A. Terrell

Jan 1, 1970
0
Jerry said:
Please help.

The computer on our HP 4062A Semiconductor Parametric Tester died. Yeah, I
know, we should've upgraded it 10 years ago while it was still supported,
but nobody wanted to lay out the capital funds. I am now tasked with taking
the system components (below) and building a new PC-based system. The
components are:

HP4820B C Meter/C-V Plotter
HP4141B Stimulus/Measurement Unit
HP4084B Switch Matrix Controller (with a 4085 switch)

Now for the bad I don't have any of the component's documentation,
except the 4820. Searches on Agilent.com have yeilded nothing useful
(they're obsolete and they stopped supporting them years ago).

I need the HP-IB commands and data format info for the 4141 and the
4084/4085. Any help would be greatly appreciated.


Keep an eye on ebay, you might find another system fairly cheap.


--
Service to my country? Been there, Done that, and I've got my DD214 to
prove it.
Member of DAV #85.

Michael A. Terrell
Central Florida
 
B

Bob Pownall

Jan 1, 1970
0
Jerry R wrote:
<Summary: The OP is looking for HP4062 documentation.>

I used to be the 4062 engineer for one HP's (later Agilent's) internal
IC divisions. I'll see what documentation I can turn up. Right now,
all I can find is a 2.4Mb PDF version of the 4062 programming reference
- would that be useful? If so, I can email it to you.

You mentioned you tried the Agilent website - did you try Google or used
equipment vendors?

Bob Pownall
 
J

Jerry R

Jan 1, 1970
0
Bob Pownall said:
Jerry R wrote:
<Summary: The OP is looking for HP4062 documentation.>

I used to be the 4062 engineer for one HP's (later Agilent's) internal IC
divisions. I'll see what documentation I can turn up. Right now, all I
can find is a 2.4Mb PDF version of the 4062 programming reference - would
that be useful? If so, I can email it to you.

You mentioned you tried the Agilent website - did you try Google or used
equipment vendors?

Bob Pownall

Thanks for all the help, Bob!!
....jerry
 
Top