Maker Pro
Maker Pro

need microcontroller project

N

nitin

Jan 1, 1970
0
i need a project,programmable timer based on microcontroller which
controls upto eight devices,each according to the programmed time .
 
C

Chris

Jan 1, 1970
0
nitin said:
i need a project,programmable timer based on microcontroller which
controls upto eight devices,each according to the programmed time .

Shortest distance between two points -- try a Basic Stamp. Just use a
ULN2804 to have the 8 Stamp output pins drive 8 small relays, and
you're done.

If you're looking for something more specific, could you describe your
class requirements?

Cheers
Chris
 
N

nitin

Jan 1, 1970
0
Chris said:
Shortest distance between two points -- try a Basic Stamp. Just use a
ULN2804 to have the 8 Stamp output pins drive 8 small relays, and
you're done.

If you're looking for something more specific, could you describe your
class requirements?

Cheers
Chris

actually it should comprise of timer control switches.with which each
device can be programmed to a time limit separately.the devices
controlled may be working with relays.
it should have an lcd display.
 
B

BobG

Jan 1, 1970
0
Look at the ere.co.th web site... computer, output board all ready to
program
 
N

nitin

Jan 1, 1970
0
BobG said:
Look at the ere.co.th web site... computer, output board all ready to
program

i need circuit diagram with all the inputs and outputs.i googled for
that but was unable to get that.i need just the circuit and its code.if
any schematiccs available pertaining this, u can specify that.

thanks
 
E

Eeyore

Jan 1, 1970
0
nitin said:
i need circuit diagram with all the inputs and outputs.i googled for
that but was unable to get that.i need just the circuit and its code.if
any schematiccs available pertaining this, u can specify that.

Isn't the project meant to involve *designing* the circuit and writing the code
yourself ? Cribbing wil teach you nothing other than how to cheat.

Graham
 
B

BobG

Jan 1, 1970
0
nitin said:
i need circuit diagram with all the inputs and outputs.i googled for
that but was unable to get that.i need just the circuit and its code.if
any schematiccs available pertaining this, u can specify that.
===============================================
I did specify the web site. ere.co.th They have the scematics for the
cpu bd and the output bd on the site. No need to google.. Just add
software.
 
C

Chris

Jan 1, 1970
0
Eeyore said:
Isn't the project meant to involve *designing* the circuit and writing the code
yourself ? Cribbing wil teach you nothing other than how to cheat.

Graham

College is suppose to provide a weeding function, gently herding the
unable and congenitally needy souls into journamalism degree tracks.
The OP should consider a change of careers.

There are many jobs available in America for those whose work day
consists of cruising into the office, downloading today's talking
points from Karl Rove, doing a little cut-'n'-paste, and then out early
for martinis and cocktail weenies while waiting for the early edition.

Those restless souls for whom this daily cycle is not enough can occupy
their spare time writing novels about courageous scribes who leave no
stone unturned to uncover corruption, edify the public and find the
truth.

Electronics, on the other hand, requires intelligence, diligent study,
and a willingness to work through problems to find a satisfactory
solution. And when the OP is stuck, the chips are down, and everyone's
depending on him to find the technical solution, will Google groups
help him? Will someone, anyone help this needy soul? Sadly, No!(R)

He wants the code, too. And a direct clickable link, so he wouldn't
have to cast about. Time to call the waaaaaaahmbulance.

I hope it's not too late for him to change majors, Graham. ;-)

Cheers
Chris
 
C

Chris

Jan 1, 1970
0
Chris wrote:
He wants the code, too. And a direct clickable link, so he wouldn't
have to cast about. Time to call the waaaaaaahmbulance.

I hope it's not too late for him to change majors, Graham. ;-)

Cheers
Chris

Oh, yes. And the OP is depending on the teacher not being aware that
someone might try to find what he's looking for? And already has every
conceivable example of prior art on the web, and is waiting with
steel-toed boot and a pre-signed disciplinary notice for the first
clown who tries it?

After he's expelled for plagiarism, he might have to earn a living.
Heaven forbid. And heaven help his coworkers, unless of course his
daddy owns the shop.

Chris
 
E

Eeyore

Jan 1, 1970
0
Chris said:
Chris wrote:


Oh, yes. And the OP is depending on the teacher not being aware that
someone might try to find what he's looking for? And already has every
conceivable example of prior art on the web, and is waiting with
steel-toed boot and a pre-signed disciplinary notice for the first
clown who tries it?

After he's expelled for plagiarism, he might have to earn a living.
Heaven forbid. And heaven help his coworkers, unless of course his
daddy owns the shop.

MBA !

Graham
 
M

Michael A. Terrell

Jan 1, 1970
0
Chris said:
Oh, yes. And the OP is depending on the teacher not being aware that
someone might try to find what he's looking for? And already has every
conceivable example of prior art on the web, and is waiting with
steel-toed boot and a pre-signed disciplinary notice for the first
clown who tries it?

After he's expelled for plagiarism, he might have to earn a living.
Heaven forbid. And heaven help his coworkers, unless of course his
daddy owns the shop.

Chris


Also that its posted from India, where they want to out source the
High tech jobs to?


--
Service to my country? Been there, Done that, and I've got my DD214 to
prove it.
Member of DAV #85.

Michael A. Terrell
Central Florida
 
N

nitin

Jan 1, 1970
0
ive needed the functional diagram for the project.but i got it and
ready to do the project.
thaaaaaanks.
 
Top