need mini project on electronics

[[email protected]]

i need to do a project for my semester ,i would like to the job on
electronics side except simulation.send me if any one have the
projects on electronics

 

[MooseFET]

i need to do a project for my semester ,i would like to the job on
electronics side except simulation.send me if any one have the
projects on electronics

You are best to pick a topic you care about and then try to find a
project in that area. You will find it much easier. You didn't tell
us enough to know what to suggest.

 

[Don Bowey]

i need to do a project for my semester ,i would like to the job on
electronics side except simulation.send me if any one have the
projects on electronics

My first electronics project was to disassemble my dad's perfectly good
Atwater Kent radio. It was educational in ways I didn't expect.

My next project was to build a crystal radio. It was much more pleasantly
educational.

I recommend either or both projects.

Good luck

 

[D from BC]

i need to do a project for my semester ,i would like to the job on
electronics side except simulation.send me if any one have the
projects on electronics

Electronic wire stripper...
D from BC

 

[John B]

Electronic wire stripper...
D from BC

Only if it's configured to strip live mains cables.

 

[Richard Henry]

i need to do a project for my semester ,i would like to the job on
electronics side except simulation.send me if any one have the
projects on electronics

A battery-powered device that converts atmospheric CO2 to oxygen and
charcoal would be popular right now.

 

[Richard Henry]

A battery-powered device that converts atmospheric CO2 to oxygen and
charcoal would be popular right now.

On second thought, make that a solar-powered device.

 

[Bob Myers]

On second thought, make that a solar-powered device.

That's been done. It's called a "tree."

Bob M.

 

[Michael A. Terrell]

Only if it's configured to strip live mains cables.

Duh! Nobody wants a dead stripper.


--
Service to my country? Been there, Done that, and I've got my DD214 to
prove it.
Member of DAV #85.

Michael A. Terrell
Central Florida

 

[John Fields]

i need to do a project for my semester ,i would like to the job on
electronics side except simulation.send me if any one have the
projects on electronics

 

[D from BC]

???

How about an inkjet pen....
It's a handheld pen that uses inkjet printer technology...
D from BC

 

[Paul E. Schoen]

???

How about an inkjet pen....
It's a handheld pen that uses inkjet printer technology...
D from BC

You could make it like an iPod, where it stores text and images that
automagically squirt out the business end when you move it across the
paper. Or you could store images and make it a self-inflicted tattoo gun.

Sorta like a hand scanner in reverse.

Paul

 

[D from BC]

You could make it like an iPod, where it stores text and images that
automagically squirt out the business end when you move it across the
paper. Or you could store images and make it a self-inflicted tattoo gun.

Sorta like a hand scanner in reverse.

Paul

Yeah
Might be good as an anti-fraud measure for creating signatures on
cheques and documents.
Or perhaps just signing a pile of stuff..
"Sign here...here...here...and here...and here...here...and here."

I see Hollywood has a need for fake tatoos ex: Blade, XXX, Wild Hogs
etc.
Perhaps it can be marketed as the "Body Printer"
Only problem is moving the print head by hand so the image is not
skewed.

D from BC

 

[Rich the Newsgroup Wacko]

There once was a fellow called Dave
Who dug a dead whore from her grave,
She had only one tit
And was covered in shit,
But think of the money he saved!

Driving through town, big sign on bar marquee: "LIVE NUDES!!!"

Well, that's a good choice. ;-)

 

[Rich Grise]

Yeah
Might be good as an anti-fraud measure for creating signatures on
cheques and documents.
Or perhaps just signing a pile of stuff..
"Sign here...here...here...and here...and here...here...and here."

I see Hollywood has a need for fake tatoos ex: Blade, XXX, Wild Hogs
etc.
Perhaps it can be marketed as the "Body Printer"
Only problem is moving the print head by hand so the image is not
skewed.

Put a little roller at either end of the printhead, to sense their
relative positions/speeds, and calculate which pixel should go
where.

Cheers!
Rich

 

[JosephKK]

Michael A. Terrell [email protected] posted to
sci.electronics.design:

Duh! Nobody wants a dead stripper.

Normally, but i have met some really kinky people.

 

[JosephKK]

Bob Myers [email protected] posted to
sci.electronics.design:

That's been done. It's called a "tree."

Bob M.

That creates wood, we want to omit that step.

 

[Rich Grise]

Michael A. Terrell [email protected] posted to

Normally, but i have met some really kinky people.

There was a young fellow named Dave,
Who kept a dead whore in a cave.
Da Dadada da,
Da Dadada da,
But think of the money he saved!

Cheers!
Rich

 

[JosephKK]

Rich Grise [email protected] posted to sci.electronics.design:

There was a young fellow named Dave,
Who kept a dead whore in a cave.
Da Dadada da,
Da Dadada da,
But think of the money he saved!

Cheers!
Rich

Yup, that is the kind of kinky i am talking about (not practicing that
kink, live is much cheaper in most civilized areas).