Always Some Project
- Aug 28, 2018
- 3
- Joined
- Aug 28, 2018
- Messages
- 3
Hi folks.
First time post and don't know whether I'm in the right part of the forum but will see.
Long story short, I've acquired a set of traffic lights which I intend on fitting in my pub but have been looking for a 'simple' , off the shelf, programmable controller to just switch between the three lights constantly and hopefully have a memory after power off.
Already have the crossing lights up with a controller that I bought from China (Frm01) but that can only control two outputs.
UK based so 240v and using G4 2.5W bulbs.
Many thanks
Gordon
First time post and don't know whether I'm in the right part of the forum but will see.
Long story short, I've acquired a set of traffic lights which I intend on fitting in my pub but have been looking for a 'simple' , off the shelf, programmable controller to just switch between the three lights constantly and hopefully have a memory after power off.
Already have the crossing lights up with a controller that I bought from China (Frm01) but that can only control two outputs.
UK based so 240v and using G4 2.5W bulbs.
Many thanks
Gordon