Needham EMP-20 power supply?

[Joe]

Hi,

Ive got an emp-20 but no power supply... Anyone know what the parameters
are for that??

The power goes into a bridge rectifier on the board, so I assume its AC,
but I dont know the voltage...

Thanks, Joe

 

[Graham]

Hi,

Ive got an emp-20 but no power supply... Anyone know what the parameters
are for that??

The power goes into a bridge rectifier on the board, so I assume its AC,
but I dont know the voltage...

Thanks, Joe

12 volts AC or 15 volts DC

3 AMP

As there is a bridge rectifier on the board, DC polarity will not matter


Thanks to Google cache for this.
http://snipurl.com/cwmz




--
Graham.



%Profound_observation%

 

[Joe]

Hi,

Ive got an emp-20 but no power supply... Anyone know what the parameters
are for that??

The power goes into a bridge rectifier on the board, so I assume its AC,
but I dont know the voltage...

Thanks, Joe

Thanks,

12vac it is... Should have googled it first

Thanks again!

/Joe

 

[Jeff Walther]

Thanks,

12vac it is... Should have googled it first

The last time I checked, you could still order the PS from Needham. I
have an EMP-30 I got with no power supply. I think the PS was ~$15 from
Needham. I needed a couple of sockets and the family modules too, so it
was easy just to order it all at once.

Jeff