Maker Pro
Maker Pro

nes controller for air ride switchbox


Sep 4, 2012
Sep 4, 2012
hello, new guy from pittsburgh.
im fairly new to electronics, i am an electrician by trade but not real good with electronics. what im hoping someone can help me do is draw up a schematic or even make me a box to plug an nes controller into, to control air ride. i have 6 valves, so id want to use the directional pad and a and b all as outputs. start and select doesnt need to be used for my application. from what ive gathered, it seems like the parts i would need are:

BS2 breadboard
8X 5V relays
project enclosure
5V automotive power supply.
Terminal strips and grommets

ive also found a company that sells the socket to plug the controller into.

so basically i need to run the 5 volt power supply to the existing power input on controller, i just dont know what to do with the bs2 IC and breadboard, ive never used one. can someone explain to me (im fairly new to this, be easy on me) lol. how this works? or if someone wants to make this, id be willing to pay them for their time, labor and parts. let me know! thanks everyone!