Maker Pro
Maker Pro

NETLIST problem in Altium Designer 6.6

krishna dave

Dec 16, 2016
2
Joined
Dec 16, 2016
Messages
2
While giving netlist in altium designer 6.6, one pin of the IC remains not connected on PCB although it is connected to GND in schematic. I came to know about this error after troubleshooting n board itself. Even this error also not shown in DRC. Can anyone please explain how this type of errors can be corrected or reason for this error?
 

Arouse1973

Adam
Dec 18, 2013
5,178
Joined
Dec 18, 2013
Messages
5,178
Show us the schematic. Can you add the file here also, I have Altium so I might be able to open it and have a look.
Thanks
Adam
 
Top