Maker Pro
Maker Pro

Newbie looking for component help- Electrofishing Boat Power Supply Box

griffy1891

Feb 9, 2015
1
Joined
Feb 9, 2015
Messages
1
Hello,

Thank you in advance to anyone who can help!

I work at a company that offers electrofishing surveys, much like most state Department of Natural Resources. We have the scientific permit for our state. Our equipment that we currently have is antiquated. We are looking to build a new control box.

There are many manuals on parameters for these boxes. This gives the overall ideology:
http://electrofishing.net/wp-content/uploads/2009/09/electrofishing_with_power_1.41_manual.pdf


There are a couple companies that sell them:

http://www.midwestlake.com/electrofishing-control-box/
http://store.smith-root.com/catalog/electrofisher-system-p-2.html


I spoke to a Representative at Mouser. They said they most likely have all of the components, but we should go on a forum to help get them listed.

So if anyone could please help with lists of components it would be much appreciated.
 

(*steve*)

¡sǝpodᴉʇuɐ ǝɥʇ ɹɐǝɥd
Moderator
Jan 21, 2010
25,505
Joined
Jan 21, 2010
Messages
25,505
Why not buy one?

Saves time and you have someone to repair it. I mention this because it sounds like you don't have much experience and the power levels discussed in your pdf are not something that I would encourage a beginner to be playing with.
 
Top