Maker Pro
Maker Pro

Newbie Question: 12v led ?push button latching switch

Criticalim

Mar 5, 2017
2
Joined
Mar 5, 2017
Messages
2
I have a 12v led push button switch that I want to function like a regular push button that does not use any power, i.e. No led. I want to use the led, but when pushed I do not want to send power over the load, just close conductivity like a regular push button.

So, is there a way to drop the 12v that would normally be sent over the load to basically zero?

Thanks
 

Bluejets

Oct 5, 2014
6,999
Joined
Oct 5, 2014
Messages
6,999
You have the switch but we have nothing.

Can you show a pic or two and the specs.?
 

BobK

Jan 5, 2010
7,682
Joined
Jan 5, 2010
Messages
7,682
If I understand you correctly, you want to use the switch in a place where it is not acting like a power switch but still have the LED light. You need to tell us more about the switch and the application.

Bob
 
Top