Criticalim
- Mar 5, 2017
- 2
- Joined
- Mar 5, 2017
- Messages
- 2
I have a 12v led push button switch that I want to function like a regular push button that does not use any power, i.e. No led. I want to use the led, but when pushed I do not want to send power over the load, just close conductivity like a regular push button.
So, is there a way to drop the 12v that would normally be sent over the load to basically zero?
Thanks
So, is there a way to drop the 12v that would normally be sent over the load to basically zero?
Thanks