A
Andre
- Jan 1, 1970
- 0
Dear all,
I would like to weld 2 lithium battery cells together using spot
welder. I understand that it's common using nickle tab on this purpose.
The nickle tab dimension is about 0.5cm x 3cm.
My question is: can I replace nickle with aluminium or copper or other
material since nickle cost me alot and it's hard to find them here? My
concern if I don't use nickle, they will have lower performance and/or
won't have a longer life.
Please advice.
Many thanks!
Andre <[email protected]>
I would like to weld 2 lithium battery cells together using spot
welder. I understand that it's common using nickle tab on this purpose.
The nickle tab dimension is about 0.5cm x 3cm.
My question is: can I replace nickle with aluminium or copper or other
material since nickle cost me alot and it's hard to find them here? My
concern if I don't use nickle, they will have lower performance and/or
won't have a longer life.
Please advice.
Many thanks!
Andre <[email protected]>