Maker Pro
Maker Pro

no uhf receptions

D

Dave

Hello, I can reciecve channels 6-13. But I can't receicve anything
from 14-58? Can you help me/ Dave Miller.
 
C

Charles Schuler

Dave said:
Hello, I can reciecve channels 6-13. But I can't receicve anything
from 14-58? Can you help me/ Dave Miller.

Make and model and vintage and signal source or sources would be helpful.

Some receivers have separate tuners ... the UHF tuner might be bad or ...
lots of stuff!
 
S

spam

Dave said:
Hello, I can reciecve channels 6-13. But I can't receicve anything
from 14-58? Can you help me/ Dave Miller.
Are you connected to an antenna or cable? If antenna, is a UHF antenna
connected to the UHF tuner input? Is the TV switch set to antenna, not
to cable?
 
R

Randy

Hello, I can reciecve channels 6-13. But I can't receicve anything
from 14-58? Can you help me/ Dave Miller.

not much info to go on but first i would check to see if you have a
uhf antenna connected, then i would check to see if you have power to
the uhf section of the tuner (im guessing its a varactor tuner)
 
Top