Maker Pro
Maker Pro

Non Standard Pin out - PNP

P

PFITZ

Jan 1, 1970
0
Hi All,

First off I want to apologise for x-posting this request, it's just
that it's pretty urgent and I thought more people might see it in
here.


We've had a board back that has a BC807 on it and the emitter &
collector pins have been mixed up on the board.

It's a SOT-23 package with a pinout as shown on pg 2 here
http://www.nxp.com/acrobat_download/datasheets/BC807_BC807W_BC327_5.pdf


so looking down on the board we have the following as a pin layout.


3
1 2


Currently the BC807 is 1-Base, 2-Emitter, 3-Collector


I need a device that is 1-Base, 2-Collector, 3-Emitter in a SOT-23
package.


Does anybody know of a comparable part that comes in this pinout?


Thanks for any help in advance, could do with finding a device to fit
this rather than having to respin the board.

P
 
?

_

Jan 1, 1970
0
Hi All,

First off I want to apologise for x-posting this request, it's just
that it's pretty urgent and I thought more people might see it in
here.


We've had a board back that has a BC807 on it and the emitter &
collector pins have been mixed up on the board.

It's a SOT-23 package with a pinout as shown on pg 2 here
http://www.nxp.com/acrobat_download/datasheets/BC807_BC807W_BC327_5.pdf


so looking down on the board we have the following as a pin layout.


3
1 2


Currently the BC807 is 1-Base, 2-Emitter, 3-Collector


I need a device that is 1-Base, 2-Collector, 3-Emitter in a SOT-23
package.


Does anybody know of a comparable part that comes in this pinout?


Thanks for any help in advance, could do with finding a device to fit
this rather than having to respin the board.

How many boards?

Could you bend the leads and mount the part upside-down?
 
P

PFITZ

Jan 1, 1970
0
How many boards?

Could you bend the leads and mount the part upside-down?

There aren't that many boards so this might be a possibilty for the
time being, would like to know if there are any other alternatively
pinned components out there though.
 
Top