Maker Pro
Maker Pro

Noob needs help with layering in Cadence Allegro

A

ajcrm125

Jan 1, 1970
0
Ok... so I want to make an edge connector part for my library.
Something like the connector on the right:
http://www.brasington.org/arcade/tech/astdlx/pic1.jpg

I create a simple oblong padstack of a certain size. Then I create a
PCB symbol and toss a bunch of the pads down. Looking good.....
But I can't seem to figure out how to now lay down a bunch more, but
assign then to the bottom layer. (Pins 1-23 of the top, pins 24-46 on
the bottom).

I must be missing something simple...
Thanks for any help.
-Adam
 
Top