Maker Pro
Maker Pro

Normally closed loop with relay trigger

jbelectric777

Nov 29, 2012
32
Joined
Nov 29, 2012
Messages
32
Hi Everyone, Been a while since my last visit, can you guys look at this attachment and tell me if it would work or not? All theory and self experience tells me yes, it would, but the program either isn't set up for slightly advanced circuits or I am totally wrong, the program is the free Yenka.

Thanks in advance, you guys are awesome!
Jim

cct3.GIF
 
Last edited by a moderator:

davenn

Moderator
Sep 5, 2009
14,254
Joined
Sep 5, 2009
Messages
14,254
and tell me if it would work or not?

depends on what you are trying to achieve .... you haven't stated the circuit's purpose

the top switch will activate the relay will give 15 V out on both relay contacts instead of just one
what did you want the bottom pushbutton switch to do ?

EDIT: since the top switch is in the on position, that infers the relay is activated and as such
contacts are as shown ( the relay COMMON contact is connected to the NO contact )

at the moment , pushing it will just turn the LED on and off .... it wont affect the relay operation


Dave
 
Top