Maker Pro
Maker Pro

Not working 12v dc to 220v Ac

teja4

Jan 23, 2023
8
Joined
Jan 23, 2023
Messages
8
it is worked for min with 7 amps battery and the transformer makes sounds
and suddenly stopped
i wanted to make an new circuit. is there any circuit related to it with easy method
 

Alec_t

Jul 7, 2015
3,587
Joined
Jul 7, 2015
Messages
3,587
Does that even matter ?
Yes. The paste ensures good thermal contact between FET and heatsink so that the heatsink can do its job.
Btw, have you checked your 555 oscillation frequency? Simulation indicates that for the component values shown the pot would have to be set to less than 1k if you want the frequency to be 50Hz or 60Hz. If the pot is currently set near mid-range the frequency will be only ~13Hz ! That could account for components over-heating, since the transformer impedance would be very low.
It would be preferable to reduce the timing cap to, say, 2uF so that the pot would give a more useful range of adjustment.
 
Top