Maker Pro
Maker Pro

NRF24L01 radio transceiver

Nikitalodha

May 29, 2018
3
Joined
May 29, 2018
Messages
3
Is it possible to send three transmitter readings at the same time to the three different nrf based receivers. Moreover, do we need to have transmitter and receiver on same channel? How to set those channels?
 

(*steve*)

¡sǝpodᴉʇuɐ ǝɥʇ ɹɐǝɥd
Moderator
Jan 21, 2010
25,506
Joined
Jan 21, 2010
Messages
25,506
These devices are normally operated in a manner where transmissions are acknowledged or retransmitted. If being used like this then you can't send a single message to multiple receivers.

I'm not certain if you can operate the device at a lower level. If you did, toys have to handle error detection and correction yourself.
 
Top