Maker Pro
Maker Pro

NSI dimming lights system

J

James Del Mul

Jan 1, 1970
0
Does anyone have experience working with Dimming packs?

We are having multiple channels that will start changing their intensities
on there own. What things should I start looking for?
 
B

Bill Renfro

Jan 1, 1970
0
Which dimmers? What controller?
That's the first thing to look for.
Do they change without the controller connected?
Are the changes on random channels or the same channel all the time?
Bill
Christian Technology
 
J

James Del Mul

Jan 1, 1970
0
dimmer: 2408 CD 8 channel
controller: MC 7016

The controller is always connected. So far the changes are only on three
channels of one dimmer pack. It started out only being on one channel
though. Sometimes it happens right after they are turned on, sometimes it is
after they have been on for a few hours.
 
J

James Sweet

Jan 1, 1970
0
James Del Mul said:
dimmer: 2408 CD 8 channel
controller: MC 7016

The controller is always connected. So far the changes are only on three
channels of one dimmer pack. It started out only being on one channel
though. Sometimes it happens right after they are turned on, sometimes it is
after they have been on for a few hours.

First thing I'd check is to see if there's any bulging or leaking
electrolytic capacitors in them, then look for cracked solder joints.
 
Top