B
Bookmarkw
- Jan 1, 1970
- 0
I've got a mechanical (i.e., not solid state) relay I'm using in pressurized
oil. Some boards work fine. Some, though, stick ON under pressure. Some burn
up. Holes are drilled in the package to allow oil in (to prevent the package
from collapsing.) The voltage connected to the relay is 240VAC.
Can anyone suggest a cause/solution?
Thanks!
oil. Some boards work fine. Some, though, stick ON under pressure. Some burn
up. Holes are drilled in the package to allow oil in (to prevent the package
from collapsing.) The voltage connected to the relay is 240VAC.
Can anyone suggest a cause/solution?
Thanks!